2SK3918-ZK MOSFET — Specifications & Equivalents

About the 2SK3918-ZK

The 2SK3918-ZK is a MOSFET with a drain–source voltage (V_DS) rating of 25 V and a continuous drain current (I_D) of 48 A. It can dissipate up to 29 W and is rated to a junction temperature of 150 °C. It is available in TO252 and MP3ZK packages, so confirm the pinout of the exact variant you order.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 25 V
• Max continuous drain current (I_D): 48 A
• Power dissipation (P_D): 29 W
• Max junction temperature (T_J): 150 °C
• Package: TO252, MP3ZK
• Manufacturer: Multi-source (JIS registered part number)

Typical applications

With its 25 V drain–source rating the 2SK3918-ZK sits in the very-low-voltage class of switching MOSFETs, typically found in battery protection and power-path switching, point-of-load converters and logic-level load switching in portable devices.

Gate drive and switching notes

Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 310 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the 2SK3918-ZK

A drop-in substitute for the 2SK3918-ZK should match its polarity and offer a drain–source rating of at least 25 V and a continuous drain current rating of at least 48 A.

Mechanically, check the replacement against the TO252 and MP3ZK footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Because 2SK3918-ZK is a JIS-registered part number rather than one vendor's proprietary series, it is produced by several manufacturers. Datasheet figures vary slightly between them, so check the datasheet of the brand you actually buy — this also makes like-for-like sourcing easier.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the 2SK3918-ZK?

The 2SK3918-ZK is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 25 V drain-source and 48 A continuous drain current.

What is the maximum voltage of the 2SK3918-ZK?

The 2SK3918-ZK has a maximum drain-source voltage (Vds) of 25 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the 2SK3918-ZK handle?

It is rated for 48 A of continuous drain current, with power dissipation limited to 29 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the 2SK3918-ZK come in?

It is listed in TO252 and MP3ZK. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the 2SK3918-ZK?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.