P6503NJ MOSFET — Specifications & Equivalents

About the P6503NJ

The P6503NJ is a MOSFET with a drain–source voltage (VDS) rating of 30 V and a continuous drain current (ID) of 4 A. It can dissipate up to 2 W and is rated to a junction temperature of 150 °C. It is supplied in the TSOPJW-8 package.

At a glance

  • Type: MOSFET
  • Max drain–source voltage (VDS): 30 V
  • Max continuous drain current (ID): 4 A
  • Power dissipation (PD): 2 W
  • Max junction temperature (TJ): 150 °C
  • Package: TSOPJW-8

Typical applications

With its 30 V drain–source rating the P6503NJ sits in the low-voltage class of switching MOSFETs, typically found in 12 V and 24 V automotive and industrial rails, synchronous buck converters, load switching and reverse-polarity protection and H-bridges for small motors.

Gate drive and switching notes

Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Choosing a replacement for the P6503NJ

A drop-in substitute for the P6503NJ should match its polarity and offer a drain–source rating of at least 30 V and a continuous drain current rating of at least 4 A.

Mechanically, check the replacement against the TSOPJW-8 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the P6503NJ?

The P6503NJ is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 30 V drain-source and 4 A continuous drain current.

What is the maximum voltage of the P6503NJ?

The P6503NJ has a maximum drain-source voltage (Vds) of 30 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the P6503NJ handle?

It is rated for 4 A of continuous drain current, with power dissipation limited to 2 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the P6503NJ come in?

It is listed in TSOPJW-8. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the P6503NJ?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.

Key Specifications

Pd ⓘ - Maximum Power Dissipation2 W
|Vds|ⓘ - Maximum Drain-Source Voltage30 V
|Vgs|ⓘ - Maximum Gate-Source Voltage20 V
|Id| ⓘ - Maximum Drain Current4 A
Tj ⓘ - Maximum Junction Temperature150 °C
PackageTSOPJW-8

Equivalent & Replacement Parts

Browse all electronic components