CS150N04A8 MOSFET — Specifications & Equivalents

About the CS150N04A8

The CS150N04A8 is a MOSFET with a drain–source voltage (V_DS) rating of 40 V and a continuous drain current (I_D) of 150 A. It can dissipate up to 150 W and is rated to a junction temperature of 150 °C. It is supplied in the TO-220AB package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 40 V
• Max continuous drain current (I_D): 150 A
• Power dissipation (P_D): 150 W
• Max junction temperature (T_J): 150 °C
• Package: TO-220AB

Typical applications

With its 40 V drain–source rating the CS150N04A8 sits in the low-voltage class of switching MOSFETs, typically found in 12 V and 24 V automotive and industrial rails, synchronous buck converters, load switching and reverse-polarity protection and H-bridges for small motors.

The 150 A current rating puts it in high-current territory, where conduction loss (I² × R_DS(on)) and thermal design usually matter more than switching loss. Budget for adequate copper area and a heatsink.

Gate drive and switching notes

Keep gate–source voltage within the ±30 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 550 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the CS150N04A8

A drop-in substitute for the CS150N04A8 should match its polarity and offer a drain–source rating of at least 40 V and a continuous drain current rating of at least 150 A.

Mechanically, check the replacement against the TO-220AB footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the CS150N04A8?

The CS150N04A8 is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 40 V drain-source and 150 A continuous drain current.

What is the maximum voltage of the CS150N04A8?

The CS150N04A8 has a maximum drain-source voltage (Vds) of 40 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the CS150N04A8 handle?

It is rated for 150 A of continuous drain current, with power dissipation limited to 150 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the CS150N04A8 come in?

It is listed in TO-220AB. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the CS150N04A8?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.