CRTE120N06L MOSFET — Specifications & Equivalents

About the CRTE120N06L

The CRTE120N06L is a MOSFET with a drain–source voltage (V_DS) rating of 60 V and a continuous drain current (I_D) of 16 A. It can dissipate up to 6 W and is rated to a junction temperature of 150 °C. It is supplied in the SOP8 package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 60 V
• Max continuous drain current (I_D): 16 A
• Power dissipation (P_D): 6 W
• Max junction temperature (T_J): 150 °C
• Package: SOP8

Typical applications

With its 60 V drain–source rating the CRTE120N06L sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.

Gate drive and switching notes

Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 197 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the CRTE120N06L

A drop-in substitute for the CRTE120N06L should match its polarity and offer a drain–source rating of at least 60 V and a continuous drain current rating of at least 16 A.

Mechanically, check the replacement against the SOP8 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the CRTE120N06L?

The CRTE120N06L is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 60 V drain-source and 16 A continuous drain current.

What is the maximum voltage of the CRTE120N06L?

The CRTE120N06L has a maximum drain-source voltage (Vds) of 60 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the CRTE120N06L handle?

It is rated for 16 A of continuous drain current, with power dissipation limited to 6 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the CRTE120N06L come in?

It is listed in SOP8. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the CRTE120N06L?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.