2P922A MOSFET — Specifications & Equivalents

About the 2P922A

The 2P922A is a MOSFET with a drain–source voltage (V_DS) rating of 100 V and a continuous drain current (I_D) of 10 A. It can dissipate up to 75 W and is rated to a junction temperature of 125 °C. It is supplied in the TO3 package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 100 V
• Max continuous drain current (I_D): 10 A
• Power dissipation (P_D): 75 W
• Max junction temperature (T_J): 125 °C
• Package: TO3

Typical applications

With its 100 V drain–source rating the 2P922A sits in the medium-voltage class of switching MOSFETs, typically found in 48 V and 96 V distribution systems, solar and telecom power stages, DC motor drives and intermediate-bus DC-DC converters.

Gate drive and switching notes

Keep gate–source voltage within the ±30 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Choosing a replacement for the 2P922A

A drop-in substitute for the 2P922A should match its polarity and offer a drain–source rating of at least 100 V and a continuous drain current rating of at least 10 A.

Mechanically, check the replacement against the TO3 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the 2P922A?

The 2P922A is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 100 V drain-source and 10 A continuous drain current.

What is the maximum voltage of the 2P922A?

The 2P922A has a maximum drain-source voltage (Vds) of 100 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the 2P922A handle?

It is rated for 10 A of continuous drain current, with power dissipation limited to 75 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the 2P922A come in?

It is listed in TO3. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the 2P922A?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.