18P10 MOSFET — Specifications & Equivalents

About the 18P10

The 18P10 is a MOSFET with a drain–source voltage (V_DS) rating of 100 V and a continuous drain current (I_D) of 13 A. It can dissipate up to 63 W and is rated to a junction temperature of 175 °C. It is supplied in the TO220 package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 100 V
• Max continuous drain current (I_D): 13 A
• Power dissipation (P_D): 63 W
• Max junction temperature (T_J): 175 °C
• Package: TO220

Typical applications

With its 100 V drain–source rating the 18P10 sits in the medium-voltage class of switching MOSFETs, typically found in 48 V and 96 V distribution systems, solar and telecom power stages, DC motor drives and intermediate-bus DC-DC converters.

Gate drive and switching notes

Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 60 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the 18P10

A drop-in substitute for the 18P10 should match its polarity and offer a drain–source rating of at least 100 V and a continuous drain current rating of at least 13 A.

Mechanically, check the replacement against the TO220 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the 18P10?

The 18P10 is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 100 V drain-source and 13 A continuous drain current.

What is the maximum voltage of the 18P10?

The 18P10 has a maximum drain-source voltage (Vds) of 100 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the 18P10 handle?

It is rated for 13 A of continuous drain current, with power dissipation limited to 63 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the 18P10 come in?

It is listed in TO220. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the 18P10?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.