TJ30S06M3L MOSFET — Specifications & Equivalents

About the TJ30S06M3L

The TJ30S06M3L is a MOSFET with a drain–source voltage (V_DS) rating of 60 V and a continuous drain current (I_D) of 30 A. It can dissipate up to 68 W and is rated to a junction temperature of 175 °C. It is supplied in the DPAK package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 60 V
• Max continuous drain current (I_D): 30 A
• Power dissipation (P_D): 68 W
• Max junction temperature (T_J): 175 °C
• Package: DPAK

Typical applications

With its 60 V drain–source rating the TJ30S06M3L sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.

Gate drive and switching notes

Keep gate–source voltage within the ±10 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 360 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the TJ30S06M3L

A drop-in substitute for the TJ30S06M3L should match its polarity and offer a drain–source rating of at least 60 V and a continuous drain current rating of at least 30 A.

Mechanically, check the replacement against the DPAK footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the TJ30S06M3L?

The TJ30S06M3L is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 60 V drain-source and 30 A continuous drain current.

What is the maximum voltage of the TJ30S06M3L?

The TJ30S06M3L has a maximum drain-source voltage (Vds) of 60 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the TJ30S06M3L handle?

It is rated for 30 A of continuous drain current, with power dissipation limited to 68 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the TJ30S06M3L come in?

It is listed in DPAK. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the TJ30S06M3L?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.