TJ70A06J3 MOSFET — Specifications & Equivalents
About the TJ70A06J3
The TJ70A06J3 is a P-channel MOSFET with a drain–source voltage (VDS) rating of 60 V, a continuous drain current (ID) of 70 A and an on-resistance (RDS(on)) of 0.008 Ω. It can dissipate up to 54 W and is rated to a junction temperature of 175 °C. It is supplied in the TO220SIS package.
At a glance
- Type: P-channel MOSFET
- Max drain–source voltage (VDS): 60 V
- Max continuous drain current (ID): 70 A
- On-resistance (RDS(on)): 0.008 Ω
- Power dissipation (PD): 54 W
- Max junction temperature (TJ): 175 °C
- Package: TO220SIS
Typical applications
With its 60 V drain–source rating the TJ70A06J3 sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.
The 70 A current rating puts it in high-current territory, where conduction loss (I² × RDS(on)) and thermal design usually matter more than switching loss. Budget for adequate copper area and a heatsink.
The low 0.008 Ω on-resistance keeps conduction loss down, which suits synchronous rectification and continuous high-current paths.
Gate drive and switching notes
Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 16 ns and an output capacitance (Coss) of 1505 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the TJ70A06J3
A drop-in substitute for the TJ70A06J3 must be the same P-channel type and offer a drain–source rating of at least 60 V, a continuous drain current rating of at least 70 A and an on-resistance no higher than 0.008 Ω if efficiency and heat matter.
Mechanically, check the replacement against the TO220SIS footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the TJ70A06J3?
The TJ70A06J3 is a P-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 60 V drain-source and 70 A continuous drain current.
What is the maximum voltage of the TJ70A06J3?
The TJ70A06J3 has a maximum drain-source voltage (Vds) of 60 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the TJ70A06J3 handle?
It is rated for 70 A of continuous drain current, with power dissipation limited to 54 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the TJ70A06J3?
On-resistance (Rds(on)) is 0.008 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the TJ70A06J3 come in?
It is listed in TO220SIS. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the TJ70A06J3?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | P -Channel |
| Drain-Source Voltage (Vds) | 60 V |
| Gate-Source Voltage (Vgs) | 20 V |
| Drain Current (Id) | 70 A |
| Drain-Source On-Resistance (Rds) | 0.008 |
| Rise Time (tr) | 16 nS |
| Output Capacitance (Coss) | 1505 pF |
| Junction Temperature (Tj) | 175 °C |
| Package | TO220SIS |
| Power Dissipation (Pd) | 54 W |
Equivalent & Replacement Parts
No verified equivalents are listed for TJ70A06J3 yet.