CS4145 MOSFET — Specifications & Equivalents

About the CS4145

The CS4145 is a MOSFET with a drain–source voltage (V_DS) rating of 60 V and a continuous drain current (I_D) of 84 A. It can dissipate up to 200 W and is rated to a junction temperature of 175 °C. It is supplied in the TO220AB package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 60 V
• Max continuous drain current (I_D): 84 A
• Power dissipation (P_D): 200 W
• Max junction temperature (T_J): 175 °C
• Package: TO220AB

Typical applications

With its 60 V drain–source rating the CS4145 sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.

The 84 A current rating puts it in high-current territory, where conduction loss (I² × R_DS(on)) and thermal design usually matter more than switching loss. Budget for adequate copper area and a heatsink.

Gate drive and switching notes

Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 375 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the CS4145

A drop-in substitute for the CS4145 should match its polarity and offer a drain–source rating of at least 60 V and a continuous drain current rating of at least 84 A.

Mechanically, check the replacement against the TO220AB footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the CS4145?

The CS4145 is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 60 V drain-source and 84 A continuous drain current.

What is the maximum voltage of the CS4145?

The CS4145 has a maximum drain-source voltage (Vds) of 60 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the CS4145 handle?

It is rated for 84 A of continuous drain current, with power dissipation limited to 200 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the CS4145 come in?

It is listed in TO220AB. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the CS4145?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.