IRFP3710 MOSFET — Specifications & Equivalents

About the IRFP3710

The IRFP3710 is a MOSFET with a drain–source voltage (V_DS) rating of 100 V and a continuous drain current (I_D) of 57 A. It can dissipate up to 200 W and is rated to a junction temperature of 175 °C. It is supplied in the TO247AC package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 100 V
• Max continuous drain current (I_D): 57 A
• Power dissipation (P_D): 200 W
• Max junction temperature (T_J): 175 °C
• Package: TO247AC
• Manufacturer: Commonly produced by International Rectifier (now Infineon)

Typical applications

With its 100 V drain–source rating the IRFP3710 sits in the medium-voltage class of switching MOSFETs, typically found in 48 V and 96 V distribution systems, solar and telecom power stages, DC motor drives and intermediate-bus DC-DC converters.

The 57 A current rating puts it in high-current territory, where conduction loss (I² × R_DS(on)) and thermal design usually matter more than switching loss. Budget for adequate copper area and a heatsink.

Gate drive and switching notes

Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 640 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the IRFP3710

A drop-in substitute for the IRFP3710 should match its polarity and offer a drain–source rating of at least 100 V and a continuous drain current rating of at least 57 A.

Mechanically, check the replacement against the TO247AC footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the IRFP3710?

The IRFP3710 is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 100 V drain-source and 57 A continuous drain current.

What is the maximum voltage of the IRFP3710?

The IRFP3710 has a maximum drain-source voltage (Vds) of 100 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the IRFP3710 handle?

It is rated for 57 A of continuous drain current, with power dissipation limited to 200 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the IRFP3710 come in?

It is listed in TO247AC. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the IRFP3710?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.