IRFP233 MOSFET — Specifications & Equivalents

About the IRFP233

The IRFP233 is a MOSFET with a drain–source voltage (V_DS) rating of 150 V and a continuous drain current (I_D) of 8 A. It can dissipate up to 75 W and is rated to a junction temperature of 150 °C. It is supplied in the TO3P package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 150 V
• Max continuous drain current (I_D): 8 A
• Power dissipation (P_D): 75 W
• Max junction temperature (T_J): 150 °C
• Package: TO3P
• Manufacturer: Commonly produced by International Rectifier (now Infineon)

Typical applications

With its 150 V drain–source rating the IRFP233 sits in the medium-voltage class of switching MOSFETs, typically found in 48 V and 96 V distribution systems, solar and telecom power stages, DC motor drives and intermediate-bus DC-DC converters.

Gate drive and switching notes

Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 120 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the IRFP233

A drop-in substitute for the IRFP233 should match its polarity and offer a drain–source rating of at least 150 V and a continuous drain current rating of at least 8 A.

Mechanically, check the replacement against the TO3P footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the IRFP233?

The IRFP233 is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 150 V drain-source and 8 A continuous drain current.

What is the maximum voltage of the IRFP233?

The IRFP233 has a maximum drain-source voltage (Vds) of 150 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the IRFP233 handle?

It is rated for 8 A of continuous drain current, with power dissipation limited to 75 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the IRFP233 come in?

It is listed in TO3P. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the IRFP233?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.