IRFP151 MOSFET — Specifications & Equivalents
Manufacturer: Commonly produced by International Rectifier (now Infineon)
About the IRFP151
The IRFP151 is an N-channel MOSFET with a drain–source voltage (VDS) rating of 60 V, a continuous drain current (ID) of 40 A and an on-resistance (RDS(on)) of 0.055 Ω. It can dissipate up to 150 W and is rated to a junction temperature of 150 °C. It is supplied in the TO218 package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 60 V
- Max continuous drain current (ID): 40 A
- On-resistance (RDS(on)): 0.055 Ω
- Power dissipation (PD): 150 W
- Max junction temperature (TJ): 150 °C
- Package: TO218
- Manufacturer: Commonly produced by International Rectifier (now Infineon)
Typical applications
With its 60 V drain–source rating the IRFP151 sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.
Gate drive and switching notes
Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 100 ns and an output capacitance (Coss) of 1500 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the IRFP151
A drop-in substitute for the IRFP151 must be the same N-channel type and offer a drain–source rating of at least 60 V, a continuous drain current rating of at least 40 A and an on-resistance no higher than 0.055 Ω if efficiency and heat matter.
Mechanically, check the replacement against the TO218 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the IRFP151?
The IRFP151 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 60 V drain-source and 40 A continuous drain current.
What is the maximum voltage of the IRFP151?
The IRFP151 has a maximum drain-source voltage (Vds) of 60 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the IRFP151 handle?
It is rated for 40 A of continuous drain current, with power dissipation limited to 150 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the IRFP151?
On-resistance (Rds(on)) is 0.055 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the IRFP151 come in?
It is listed in TO218. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the IRFP151?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 60 V |
| Gate-Source Voltage (Vgs) | 20 V |
| Drain Current (Id) | 40 A |
| Drain-Source On-Resistance (Rds) | 0.055 |
| Rise Time (tr) | 100 |
| Output Capacitance (Coss) | 1500 |
| Junction Temperature (Tj) | 150 °C |
| Package | TO218 |
| Power Dissipation (Pd) | 150 W |
Equivalent & Replacement Parts
No verified equivalents are listed for IRFP151 yet.