2P829G9 MOSFET — Specifications & Equivalents

About the 2P829G9

The 2P829G9 is a MOSFET with a drain–source voltage (V_DS) rating of 200 V and a continuous drain current (I_D) of 40 A. It can dissipate up to 125 W and is rated to a junction temperature of 125 °C. It is supplied in the КТ-95-1 package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 200 V
• Max continuous drain current (I_D): 40 A
• Power dissipation (P_D): 125 W
• Max junction temperature (T_J): 125 °C
• Package: КТ-95-1

Typical applications

With its 200 V drain–source rating the 2P829G9 sits in the medium-high-voltage class of switching MOSFETs, typically found in telecom and industrial DC rails, boost and flyback converters, LED and backlight drivers and power-factor-correction stages. Common where the bus sits well above 100 V but below rectified mains.

Gate drive and switching notes

Keep gate–source voltage within the ±25 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 1200 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the 2P829G9

A drop-in substitute for the 2P829G9 should match its polarity and offer a drain–source rating of at least 200 V and a continuous drain current rating of at least 40 A.

Mechanically, check the replacement against the КТ-95-1 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the 2P829G9?

The 2P829G9 is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 200 V drain-source and 40 A continuous drain current.

What is the maximum voltage of the 2P829G9?

The 2P829G9 has a maximum drain-source voltage (Vds) of 200 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the 2P829G9 handle?

It is rated for 40 A of continuous drain current, with power dissipation limited to 125 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the 2P829G9 come in?

It is listed in КТ-95-1. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the 2P829G9?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.