2015 MOSFET — Specifications & Equivalents

About the 2015

The 2015 is a MOSFET with a drain–source voltage (VDS) rating of 20 V and a continuous drain current (ID) of 2.8 A. It can dissipate up to 1.25 W and is rated to a junction temperature of 150 °C. It is supplied in the SOT23 package.

At a glance

  • Type: MOSFET
  • Max drain–source voltage (VDS): 20 V
  • Max continuous drain current (ID): 2.8 A
  • Power dissipation (PD): 1.25 W
  • Max junction temperature (TJ): 150 °C
  • Package: SOT23

Typical applications

With its 20 V drain–source rating the 2015 sits in the very-low-voltage class of switching MOSFETs, typically found in battery protection and power-path switching, point-of-load converters and logic-level load switching in portable devices.

Gate drive and switching notes

Keep gate–source voltage within the ±8 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (Coss) of 62 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the 2015

A drop-in substitute for the 2015 should match its polarity and offer a drain–source rating of at least 20 V and a continuous drain current rating of at least 2.8 A.

Mechanically, check the replacement against the SOT23 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the 2015?

The 2015 is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 20 V drain-source and 2.8 A continuous drain current.

What is the maximum voltage of the 2015?

The 2015 has a maximum drain-source voltage (Vds) of 20 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the 2015 handle?

It is rated for 2.8 A of continuous drain current, with power dissipation limited to 1.25 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the 2015 come in?

It is listed in SOT23. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the 2015?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.

Key Specifications

Pd ⓘ - Maximum Power Dissipation1.25 W
|Vds|ⓘ - Maximum Drain-Source Voltage20 V
|Vgs|ⓘ - Maximum Gate-Source Voltage8 V
|Id| ⓘ - Maximum Drain Current2.8 A
Tj ⓘ - Maximum Junction Temperature150 °C
Cossⓘ - Output Capacitance62 pF
PackageSOT23

Equivalent & Replacement Parts

Browse all electronic components