TK10X40D MOSFET — Specifications & Equivalents
Manufacturer: Commonly produced by Toshiba
About the TK10X40D
The TK10X40D is an N-channel MOSFET with a drain–source voltage (VDS) rating of 400 V, a continuous drain current (ID) of 10 A and an on-resistance (RDS(on)) of 0.55 Ω. It can dissipate up to 125 W and is rated to a junction temperature of 150 °C. It is available in SC97 and TFP packages, so confirm the pinout of the exact variant you order.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 400 V
- Max continuous drain current (ID): 10 A
- On-resistance (RDS(on)): 0.55 Ω
- Power dissipation (PD): 125 W
- Max junction temperature (TJ): 150 °C
- Package: SC97, TFP
- Manufacturer: Commonly produced by Toshiba
Typical applications
With its 400 V drain–source rating the TK10X40D sits in the medium-high-voltage class of switching MOSFETs, typically found in telecom and industrial DC rails, boost and flyback converters, LED and backlight drivers and power-factor-correction stages. Common where the bus sits well above 100 V but below rectified mains.
Gate drive and switching notes
Keep gate–source voltage within the ±30 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 25 ns and an output capacitance (Coss) of 100 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the TK10X40D
A drop-in substitute for the TK10X40D must be the same N-channel type and offer a drain–source rating of at least 400 V, a continuous drain current rating of at least 10 A and an on-resistance no higher than 0.55 Ω if efficiency and heat matter.
Mechanically, check the replacement against the SC97 and TFP footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the TK10X40D?
The TK10X40D is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 400 V drain-source and 10 A continuous drain current.
What is the maximum voltage of the TK10X40D?
The TK10X40D has a maximum drain-source voltage (Vds) of 400 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the TK10X40D handle?
It is rated for 10 A of continuous drain current, with power dissipation limited to 125 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the TK10X40D?
On-resistance (Rds(on)) is 0.55 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the TK10X40D come in?
It is listed in SC97 and TFP. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the TK10X40D?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 400 V |
| Gate-Source Voltage (Vgs) | 30 V |
| Drain Current (Id) | 10 A |
| Drain-Source On-Resistance (Rds) | 0.55 |
| Rise Time (tr) | 25 nS |
| Output Capacitance (Coss) | 100 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | SC97 TFP |
| Power Dissipation (Pd) | 125 W |
Equivalent & Replacement Parts
No verified equivalents are listed for TK10X40D yet.