RFP8P06LE MOSFET — Specifications & Equivalents

About the RFP8P06LE

The RFP8P06LE is a MOSFET with a drain–source voltage (V_DS) rating of 60 V and a continuous drain current (I_D) of 8 A. It can dissipate up to 48 W and is rated to a junction temperature of 175 °C. It is supplied in the TO220AB package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 60 V
• Max continuous drain current (I_D): 8 A
• Power dissipation (P_D): 48 W
• Max junction temperature (T_J): 175 °C
• Package: TO220AB

Typical applications

With its 60 V drain–source rating the RFP8P06LE sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.

Gate drive and switching notes

Keep gate–source voltage within the ±10 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 175 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the RFP8P06LE

A drop-in substitute for the RFP8P06LE should match its polarity and offer a drain–source rating of at least 60 V and a continuous drain current rating of at least 8 A.

Mechanically, check the replacement against the TO220AB footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the RFP8P06LE?

The RFP8P06LE is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 60 V drain-source and 8 A continuous drain current.

What is the maximum voltage of the RFP8P06LE?

The RFP8P06LE has a maximum drain-source voltage (Vds) of 60 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the RFP8P06LE handle?

It is rated for 8 A of continuous drain current, with power dissipation limited to 48 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the RFP8P06LE come in?

It is listed in TO220AB. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the RFP8P06LE?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.