IRFP131 MOSFET — Specifications & Equivalents
Manufacturer: Commonly produced by International Rectifier (now Infineon)
About the IRFP131
The IRFP131 is an N-channel MOSFET with a drain–source voltage (VDS) rating of 80 V, a continuous drain current (ID) of 14 A and an on-resistance (RDS(on)) of 0.16 Ω. It can dissipate up to 77 W and is rated to a junction temperature of 150 °C. It is supplied in the TO3P package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 80 V
- Max continuous drain current (ID): 14 A
- On-resistance (RDS(on)): 0.16 Ω
- Power dissipation (PD): 77 W
- Max junction temperature (TJ): 150 °C
- Package: TO3P
- Manufacturer: Commonly produced by International Rectifier (now Infineon)
Typical applications
With its 80 V drain–source rating the IRFP131 sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.
Gate drive and switching notes
Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 34 ns and an output capacitance (Coss) of 240 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the IRFP131
A drop-in substitute for the IRFP131 must be the same N-channel type and offer a drain–source rating of at least 80 V, a continuous drain current rating of at least 14 A and an on-resistance no higher than 0.16 Ω if efficiency and heat matter.
Mechanically, check the replacement against the TO3P footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the IRFP131?
The IRFP131 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 80 V drain-source and 14 A continuous drain current.
What is the maximum voltage of the IRFP131?
The IRFP131 has a maximum drain-source voltage (Vds) of 80 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the IRFP131 handle?
It is rated for 14 A of continuous drain current, with power dissipation limited to 77 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the IRFP131?
On-resistance (Rds(on)) is 0.16 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the IRFP131 come in?
It is listed in TO3P. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the IRFP131?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 80 V |
| Gate-Source Voltage (Vgs) | 20 V |
| Drain Current (Id) | 14 A |
| Drain-Source On-Resistance (Rds) | 0.16 |
| Rise Time (tr) | 34 nS |
| Output Capacitance (Coss) | 240 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | TO3P |
| Power Dissipation (Pd) | 77 W |
Equivalent & Replacement Parts
No verified equivalents are listed for IRFP131 yet.