IRFML8244 MOSFET — Specifications & Equivalents

Manufacturer: Commonly produced by International Rectifier (now Infineon)

About the IRFML8244

The IRFML8244 is an N-channel MOSFET with a drain–source voltage (VDS) rating of 25 V, a continuous drain current (ID) of 5.8 A and an on-resistance (RDS(on)) of 0.024 Ω. It can dissipate up to 1.25 W and is rated to a junction temperature of 150 °C. It is supplied in the SOT23 package.

At a glance

  • Type: N-channel MOSFET
  • Max drain–source voltage (VDS): 25 V
  • Max continuous drain current (ID): 5.8 A
  • On-resistance (RDS(on)): 0.024 Ω
  • Power dissipation (PD): 1.25 W
  • Max junction temperature (TJ): 150 °C
  • Package: SOT23
  • Manufacturer: Commonly produced by International Rectifier (now Infineon)

Typical applications

With its 25 V drain–source rating the IRFML8244 sits in the very-low-voltage class of switching MOSFETs, typically found in battery protection and power-path switching, point-of-load converters and logic-level load switching in portable devices.

The low 0.024 Ω on-resistance keeps conduction loss down, which suits synchronous rectification and continuous high-current paths.

Gate drive and switching notes

Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by a rise time of 2.1 ns and an output capacitance (Coss) of 110 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the IRFML8244

A drop-in substitute for the IRFML8244 must be the same N-channel type and offer a drain–source rating of at least 25 V, a continuous drain current rating of at least 5.8 A and an on-resistance no higher than 0.024 Ω if efficiency and heat matter.

Mechanically, check the replacement against the SOT23 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the IRFML8244?

The IRFML8244 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 25 V drain-source and 5.8 A continuous drain current.

What is the maximum voltage of the IRFML8244?

The IRFML8244 has a maximum drain-source voltage (Vds) of 25 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the IRFML8244 handle?

It is rated for 5.8 A of continuous drain current, with power dissipation limited to 1.25 W. Real-world capability depends on your heatsinking and ambient temperature.

What is the on-resistance of the IRFML8244?

On-resistance (Rds(on)) is 0.024 Ω. Multiply by the square of your load current to estimate conduction loss.

What package does the IRFML8244 come in?

It is listed in SOT23. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the IRFML8244?

No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.

Key Specifications

TypeMOSFET
Channel TypeN -Channel
Drain-Source Voltage (Vds)25 V
Gate-Source Voltage (Vgs)20 V
Drain Current (Id)5.8 A
Drain-Source On-Resistance (Rds)0.024
Rise Time (tr)2.1 nS
Output Capacitance (Coss)110 pF
Junction Temperature (Tj)150 °C
PackageSOT23
Power Dissipation (Pd)1.25 W

Equivalent & Replacement Parts

No verified equivalents are listed for IRFML8244 yet.

Browse all electronic components