IRFL4315 MOSFET — Specifications & Equivalents
Manufacturer: Commonly produced by International Rectifier (now Infineon)
About the IRFL4315
The IRFL4315 is an N-channel MOSFET with a drain–source voltage (VDS) rating of 150 V, a continuous drain current (ID) of 2.6 A and an on-resistance (RDS(on)) of 0.185 Ω. It can dissipate up to 2.8 W and is rated to a junction temperature of 150 °C. It is supplied in the SOT223 package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 150 V
- Max continuous drain current (ID): 2.6 A
- On-resistance (RDS(on)): 0.185 Ω
- Power dissipation (PD): 2.8 W
- Max junction temperature (TJ): 150 °C
- Package: SOT223
- Manufacturer: Commonly produced by International Rectifier (now Infineon)
Typical applications
With its 150 V drain–source rating the IRFL4315 sits in the medium-voltage class of switching MOSFETs, typically found in 48 V and 96 V distribution systems, solar and telecom power stages, DC motor drives and intermediate-bus DC-DC converters.
Gate drive and switching notes
Keep gate–source voltage within the ±30 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 21 ns and an output capacitance (Coss) of 100 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the IRFL4315
A drop-in substitute for the IRFL4315 must be the same N-channel type and offer a drain–source rating of at least 150 V, a continuous drain current rating of at least 2.6 A and an on-resistance no higher than 0.185 Ω if efficiency and heat matter.
Mechanically, check the replacement against the SOT223 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the IRFL4315?
The IRFL4315 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 150 V drain-source and 2.6 A continuous drain current.
What is the maximum voltage of the IRFL4315?
The IRFL4315 has a maximum drain-source voltage (Vds) of 150 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the IRFL4315 handle?
It is rated for 2.6 A of continuous drain current, with power dissipation limited to 2.8 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the IRFL4315?
On-resistance (Rds(on)) is 0.185 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the IRFL4315 come in?
It is listed in SOT223. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the IRFL4315?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 150 V |
| Gate-Source Voltage (Vgs) | 30 V |
| Drain Current (Id) | 2.6 A |
| Drain-Source On-Resistance (Rds) | 0.185 |
| Rise Time (tr) | 21 nS |
| Output Capacitance (Coss) | 100 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | SOT223 |
| Power Dissipation (Pd) | 2.8 W |
Equivalent & Replacement Parts
No verified equivalents are listed for IRFL4315 yet.