IRF9Z24NL MOSFET — Specifications & Equivalents
Manufacturer: Commonly produced by International Rectifier (now Infineon)
About the IRF9Z24NL
The IRF9Z24NL is a P-channel MOSFET with a drain–source voltage (VDS) rating of 55 V, a continuous drain current (ID) of 12 A and an on-resistance (RDS(on)) of 0.175 Ω. It can dissipate up to 45 W and is rated to a junction temperature of 175 °C. It is supplied in the TO262 package.
At a glance
- Type: P-channel MOSFET
- Max drain–source voltage (VDS): 55 V
- Max continuous drain current (ID): 12 A
- On-resistance (RDS(on)): 0.175 Ω
- Power dissipation (PD): 45 W
- Max junction temperature (TJ): 175 °C
- Package: TO262
- Manufacturer: Commonly produced by International Rectifier (now Infineon)
Typical applications
With its 55 V drain–source rating the IRF9Z24NL sits in the low-voltage class of switching MOSFETs, typically found in 12 V and 24 V automotive and industrial rails, synchronous buck converters, load switching and reverse-polarity protection and H-bridges for small motors.
Gate drive and switching notes
Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 55 ns and an output capacitance (Coss) of 170 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the IRF9Z24NL
A drop-in substitute for the IRF9Z24NL must be the same P-channel type and offer a drain–source rating of at least 55 V, a continuous drain current rating of at least 12 A and an on-resistance no higher than 0.175 Ω if efficiency and heat matter.
Mechanically, check the replacement against the TO262 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the IRF9Z24NL?
The IRF9Z24NL is a P-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 55 V drain-source and 12 A continuous drain current.
What is the maximum voltage of the IRF9Z24NL?
The IRF9Z24NL has a maximum drain-source voltage (Vds) of 55 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the IRF9Z24NL handle?
It is rated for 12 A of continuous drain current, with power dissipation limited to 45 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the IRF9Z24NL?
On-resistance (Rds(on)) is 0.175 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the IRF9Z24NL come in?
It is listed in TO262. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the IRF9Z24NL?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | P -Channel |
| Drain-Source Voltage (Vds) | 55 V |
| Gate-Source Voltage (Vgs) | 20 V |
| Drain Current (Id) | 12 A |
| Drain-Source On-Resistance (Rds) | 0.175 |
| Rise Time (tr) | 55 nS |
| Output Capacitance (Coss) | 170 pF |
| Junction Temperature (Tj) | 175 °C |
| Package | TO262 |
| Power Dissipation (Pd) | 45 W |
Equivalent & Replacement Parts
No verified equivalents are listed for IRF9Z24NL yet.