IRCP150 MOSFET — Specifications & Equivalents

About the IRCP150

The IRCP150 is a MOSFET with a drain–source voltage (V_DS) rating of 180 V and a continuous drain current (I_D) of 41 A. It can dissipate up to 180 W and is rated to a junction temperature of 150 °C. It is supplied in the TO247 package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 180 V
• Max continuous drain current (I_D): 41 A
• Power dissipation (P_D): 180 W
• Max junction temperature (T_J): 150 °C
• Package: TO247

Typical applications

With its 180 V drain–source rating the IRCP150 sits in the medium-voltage class of switching MOSFETs, typically found in 48 V and 96 V distribution systems, solar and telecom power stages, DC motor drives and intermediate-bus DC-DC converters.

Gate drive and switching notes

Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Switching behaviour is characterised by an output capacitance (C_oss) of 960 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.

Choosing a replacement for the IRCP150

A drop-in substitute for the IRCP150 should match its polarity and offer a drain–source rating of at least 180 V and a continuous drain current rating of at least 41 A.

Mechanically, check the replacement against the TO247 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the IRCP150?

The IRCP150 is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 180 V drain-source and 41 A continuous drain current.

What is the maximum voltage of the IRCP150?

The IRCP150 has a maximum drain-source voltage (Vds) of 180 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the IRCP150 handle?

It is rated for 41 A of continuous drain current, with power dissipation limited to 180 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the IRCP150 come in?

It is listed in TO247. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the IRCP150?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.