FDB14AN06LA0 MOSFET — Specifications & Equivalents
Manufacturer: Commonly produced by Fairchild (now onsemi)
About the FDB14AN06LA0
The FDB14AN06LA0 is an N-channel MOSFET with a drain–source voltage (VDS) rating of 60 V, a continuous drain current (ID) of 67 A and an on-resistance (RDS(on)) of 0.033 Ω. It can dissipate up to 125 W and is rated to a junction temperature of 175 °C. It is supplied in the TO-263AB package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 60 V
- Max continuous drain current (ID): 67 A
- On-resistance (RDS(on)): 0.033 Ω
- Power dissipation (PD): 125 W
- Max junction temperature (TJ): 175 °C
- Package: TO-263AB
- Manufacturer: Commonly produced by Fairchild (now onsemi)
Typical applications
With its 60 V drain–source rating the FDB14AN06LA0 sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.
The 67 A current rating puts it in high-current territory, where conduction loss (I² × RDS(on)) and thermal design usually matter more than switching loss. Budget for adequate copper area and a heatsink.
The low 0.033 Ω on-resistance keeps conduction loss down, which suits synchronous rectification and continuous high-current paths.
Gate drive and switching notes
Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 169 ns and an output capacitance (Coss) of 270 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the FDB14AN06LA0
A drop-in substitute for the FDB14AN06LA0 must be the same N-channel type and offer a drain–source rating of at least 60 V, a continuous drain current rating of at least 67 A and an on-resistance no higher than 0.033 Ω if efficiency and heat matter.
Mechanically, check the replacement against the TO-263AB footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the FDB14AN06LA0?
The FDB14AN06LA0 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 60 V drain-source and 67 A continuous drain current.
What is the maximum voltage of the FDB14AN06LA0?
The FDB14AN06LA0 has a maximum drain-source voltage (Vds) of 60 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the FDB14AN06LA0 handle?
It is rated for 67 A of continuous drain current, with power dissipation limited to 125 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the FDB14AN06LA0?
On-resistance (Rds(on)) is 0.033 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the FDB14AN06LA0 come in?
It is listed in TO-263AB. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the FDB14AN06LA0?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 60 V |
| Gate-Source Voltage (Vgs) | 20 V |
| Drain Current (Id) | 67 A |
| Drain-Source On-Resistance (Rds) | 0.033 |
| Rise Time (tr) | 169 nS |
| Output Capacitance (Coss) | 270 pF |
| Junction Temperature (Tj) | 175 °C |
| Package | TO-263AB |
| Power Dissipation (Pd) | 125 W |
Equivalent & Replacement Parts
No verified equivalents are listed for FDB14AN06LA0 yet.