FCB11N60FTM MOSFET — Specifications & Equivalents
About the FCB11N60FTM
The FCB11N60FTM is an N-channel MOSFET with a drain–source voltage (VDS) rating of 600 V, a continuous drain current (ID) of 11 A and an on-resistance (RDS(on)) of 0.38 Ω. It can dissipate up to 125 W and is rated to a junction temperature of 150 °C. It is supplied in the D2-PAK package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 600 V
- Max continuous drain current (ID): 11 A
- On-resistance (RDS(on)): 0.38 Ω
- Power dissipation (PD): 125 W
- Max junction temperature (TJ): 150 °C
- Package: D2-PAK
Typical applications
With its 600 V drain–source rating the FCB11N60FTM sits in the high-voltage (offline) class of switching MOSFETs, typically found in primary-side switching in offline SMPS (flyback, forward and quasi-resonant), active PFC boost stages, half-bridge and full-bridge inverters, induction heating and electronic ballasts and BLDC and AC motor drives. The rating leaves usable margin above the ~325 V DC bus obtained by rectifying 230 VAC mains, which is why this class dominates offline power supplies.
Gate drive and switching notes
Keep gate–source voltage within the ±30 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 98 ns and an output capacitance (Coss) of 671 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the FCB11N60FTM
A drop-in substitute for the FCB11N60FTM must be the same N-channel type and offer a drain–source rating of at least 600 V, a continuous drain current rating of at least 11 A and an on-resistance no higher than 0.38 Ω if efficiency and heat matter.
Mechanically, check the replacement against the D2-PAK footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the FCB11N60FTM?
The FCB11N60FTM is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 600 V drain-source and 11 A continuous drain current.
What is the maximum voltage of the FCB11N60FTM?
The FCB11N60FTM has a maximum drain-source voltage (Vds) of 600 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the FCB11N60FTM handle?
It is rated for 11 A of continuous drain current, with power dissipation limited to 125 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the FCB11N60FTM?
On-resistance (Rds(on)) is 0.38 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the FCB11N60FTM come in?
It is listed in D2-PAK. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the FCB11N60FTM?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 600 V |
| Gate-Source Voltage (Vgs) | 30 V |
| Drain Current (Id) | 11 A |
| Drain-Source On-Resistance (Rds) | 0.38 |
| Rise Time (tr) | 98 nS |
| Output Capacitance (Coss) | 671 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | D2-PAK |
| Power Dissipation (Pd) | 125 W |
Equivalent & Replacement Parts
No verified equivalents are listed for FCB11N60FTM yet.