FC8V22090L MOSFET — Specifications & Equivalents
About the FC8V22090L
The FC8V22090L is an N-channel MOSFET with a drain–source voltage (VDS) rating of 24 V, a continuous drain current (ID) of 8 A and an on-resistance (RDS(on)) of 0.0118 Ω. It can dissipate up to 1 W and is rated to a junction temperature of 150 °C. It is supplied in the WMINI8-F1 package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 24 V
- Max continuous drain current (ID): 8 A
- On-resistance (RDS(on)): 0.0118 Ω
- Power dissipation (PD): 1 W
- Max junction temperature (TJ): 150 °C
- Package: WMINI8-F1
Typical applications
With its 24 V drain–source rating the FC8V22090L sits in the very-low-voltage class of switching MOSFETs, typically found in battery protection and power-path switching, point-of-load converters and logic-level load switching in portable devices.
The low 0.0118 Ω on-resistance keeps conduction loss down, which suits synchronous rectification and continuous high-current paths.
Gate drive and switching notes
Keep gate–source voltage within the ±12 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 750 ns and an output capacitance (Coss) of 115 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the FC8V22090L
A drop-in substitute for the FC8V22090L must be the same N-channel type and offer a drain–source rating of at least 24 V, a continuous drain current rating of at least 8 A and an on-resistance no higher than 0.0118 Ω if efficiency and heat matter.
Mechanically, check the replacement against the WMINI8-F1 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the FC8V22090L?
The FC8V22090L is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 24 V drain-source and 8 A continuous drain current.
What is the maximum voltage of the FC8V22090L?
The FC8V22090L has a maximum drain-source voltage (Vds) of 24 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the FC8V22090L handle?
It is rated for 8 A of continuous drain current, with power dissipation limited to 1 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the FC8V22090L?
On-resistance (Rds(on)) is 0.0118 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the FC8V22090L come in?
It is listed in WMINI8-F1. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the FC8V22090L?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 24 V |
| Gate-Source Voltage (Vgs) | 12 V |
| Drain Current (Id) | 8 A |
| Drain-Source On-Resistance (Rds) | 0.0118 |
| Rise Time (tr) | 750 nS |
| Output Capacitance (Coss) | 115 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | WMINI8-F1 |
| Power Dissipation (Pd) | 1 W |
Equivalent & Replacement Parts
No verified equivalents are listed for FC8V22090L yet.