FC694601 MOSFET — Specifications & Equivalents
About the FC694601
The FC694601 is an N-channel MOSFET with a drain–source voltage (VDS) rating of 60 V, a continuous drain current (ID) of 0.1 A and an on-resistance (RDS(on)) of 12 Ω. It can dissipate up to 0.125 W and is rated to a junction temperature of 150 °C. It is supplied in the SSMINI6-F3-B package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 60 V
- Max continuous drain current (ID): 0.1 A
- On-resistance (RDS(on)): 12 Ω
- Power dissipation (PD): 0.125 W
- Max junction temperature (TJ): 150 °C
- Package: SSMINI6-F3-B
Typical applications
With its 60 V drain–source rating the FC694601 sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.
At 0.1 A it is aimed at small-signal and light-load switching rather than power conversion.
On-resistance of 12 Ω is relatively high, so this part is better suited to low duty-cycle or low-current switching than to continuous high-current conduction.
Gate drive and switching notes
Keep gate–source voltage within the ±12 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by an output capacitance (Coss) of 7 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the FC694601
A drop-in substitute for the FC694601 must be the same N-channel type and offer a drain–source rating of at least 60 V, a continuous drain current rating of at least 0.1 A and an on-resistance no higher than 12 Ω if efficiency and heat matter.
Mechanically, check the replacement against the SSMINI6-F3-B footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the FC694601?
The FC694601 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 60 V drain-source and 0.1 A continuous drain current.
What is the maximum voltage of the FC694601?
The FC694601 has a maximum drain-source voltage (Vds) of 60 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the FC694601 handle?
It is rated for 0.1 A of continuous drain current, with power dissipation limited to 0.125 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the FC694601?
On-resistance (Rds(on)) is 12 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the FC694601 come in?
It is listed in SSMINI6-F3-B. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the FC694601?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 60 V |
| Gate-Source Voltage (Vgs) | 12 V |
| Drain Current (Id) | 0.1 A |
| Drain-Source On-Resistance (Rds) | 12 |
| Output Capacitance (Coss) | 7 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | SSMINI6-F3-B |
| Power Dissipation (Pd) | 0.125 W |
Equivalent & Replacement Parts
No verified equivalents are listed for FC694601 yet.