FC4A22050L MOSFET — Specifications & Equivalents
About the FC4A22050L
The FC4A22050L is an N-channel MOSFET with a drain–source voltage (VDS) rating of 24 V, a continuous drain current (ID) of 3.5 A and an on-resistance (RDS(on)) of 0.028 Ω. It can dissipate up to 0.4 W and is rated to a junction temperature of 150 °C. It is supplied in the MBGA004 package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 24 V
- Max continuous drain current (ID): 3.5 A
- On-resistance (RDS(on)): 0.028 Ω
- Power dissipation (PD): 0.4 W
- Max junction temperature (TJ): 150 °C
- Package: MBGA004
Typical applications
With its 24 V drain–source rating the FC4A22050L sits in the very-low-voltage class of switching MOSFETs, typically found in battery protection and power-path switching, point-of-load converters and logic-level load switching in portable devices.
The low 0.028 Ω on-resistance keeps conduction loss down, which suits synchronous rectification and continuous high-current paths.
Gate drive and switching notes
Keep gate–source voltage within the ±12 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 1500 ns and an output capacitance (Coss) of 410 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the FC4A22050L
A drop-in substitute for the FC4A22050L must be the same N-channel type and offer a drain–source rating of at least 24 V, a continuous drain current rating of at least 3.5 A and an on-resistance no higher than 0.028 Ω if efficiency and heat matter.
Mechanically, check the replacement against the MBGA004 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the FC4A22050L?
The FC4A22050L is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 24 V drain-source and 3.5 A continuous drain current.
What is the maximum voltage of the FC4A22050L?
The FC4A22050L has a maximum drain-source voltage (Vds) of 24 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the FC4A22050L handle?
It is rated for 3.5 A of continuous drain current, with power dissipation limited to 0.4 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the FC4A22050L?
On-resistance (Rds(on)) is 0.028 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the FC4A22050L come in?
It is listed in MBGA004. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the FC4A22050L?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 24 V |
| Gate-Source Voltage (Vgs) | 12 V |
| Drain Current (Id) | 3.5 A |
| Drain-Source On-Resistance (Rds) | 0.028 |
| Rise Time (tr) | 1500 nS |
| Output Capacitance (Coss) | 410 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | MBGA004 |
| Power Dissipation (Pd) | 0.4 W |
Equivalent & Replacement Parts
No verified equivalents are listed for FC4A22050L yet.