ELM24604HA MOSFET — Specifications & Equivalents
About the ELM24604HA
The ELM24604HA is a complementary N- and P-channel MOSFET with a drain–source voltage (VDS) rating of 40 V, a continuous drain current (ID) of 8 A and an on-resistance (RDS(on)) of 0.033 Ω. It can dissipate up to 20 W and is rated to a junction temperature of 150 °C. It is supplied in the TO-252-5 package.
At a glance
- Type: complementary N- and P-channel MOSFET
- Max drain–source voltage (VDS): 40 V
- Max continuous drain current (ID): 8 A
- On-resistance (RDS(on)): 0.033 Ω
- Power dissipation (PD): 20 W
- Max junction temperature (TJ): 150 °C
- Package: TO-252-5
Typical applications
With its 40 V drain–source rating the ELM24604HA sits in the low-voltage class of switching MOSFETs, typically found in 12 V and 24 V automotive and industrial rails, synchronous buck converters, load switching and reverse-polarity protection and H-bridges for small motors.
The low 0.033 Ω on-resistance keeps conduction loss down, which suits synchronous rectification and continuous high-current paths.
Gate drive and switching notes
Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 6 ns and an output capacitance (Coss) of 95 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the ELM24604HA
A drop-in substitute for the ELM24604HA must be the same complementary N- and P-channel type and offer a drain–source rating of at least 40 V, a continuous drain current rating of at least 8 A and an on-resistance no higher than 0.033 Ω if efficiency and heat matter.
Mechanically, check the replacement against the TO-252-5 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the ELM24604HA?
The ELM24604HA is a complementary N- and P-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 40 V drain-source and 8 A continuous drain current.
What is the maximum voltage of the ELM24604HA?
The ELM24604HA has a maximum drain-source voltage (Vds) of 40 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the ELM24604HA handle?
It is rated for 8 A of continuous drain current, with power dissipation limited to 20 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the ELM24604HA?
On-resistance (Rds(on)) is 0.033 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the ELM24604HA come in?
It is listed in TO-252-5. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the ELM24604HA?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | NP -Channel |
| Drain-Source Voltage (Vds) | 40 V |
| Gate-Source Voltage (Vgs) | 20 V |
| Drain Current (Id) | 8 A |
| Drain-Source On-Resistance (Rds) | 0.033 |
| Rise Time (tr) | 6 nS |
| Output Capacitance (Coss) | 95 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | TO-252-5 |
| Power Dissipation (Pd) | 20 W |
Equivalent & Replacement Parts
No verified equivalents are listed for ELM24604HA yet.