AON6484 MOSFET — Specifications & Equivalents
Manufacturer: Commonly produced by Alpha & Omega Semiconductor
About the AON6484
The AON6484 is an N-channel MOSFET with a drain–source voltage (VDS) rating of 100 V, a continuous drain current (ID) of 12 A and an on-resistance (RDS(on)) of 0.079 Ω. It can dissipate up to 25 W and is rated to a junction temperature of 150 °C. It is supplied in the DFN5X6 package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 100 V
- Max continuous drain current (ID): 12 A
- On-resistance (RDS(on)): 0.079 Ω
- Power dissipation (PD): 25 W
- Max junction temperature (TJ): 150 °C
- Package: DFN5X6
- Manufacturer: Commonly produced by Alpha & Omega Semiconductor
Typical applications
With its 100 V drain–source rating the AON6484 sits in the medium-voltage class of switching MOSFETs, typically found in 48 V and 96 V distribution systems, solar and telecom power stages, DC motor drives and intermediate-bus DC-DC converters.
Gate drive and switching notes
Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 2.5 ns and an output capacitance (Coss) of 55 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the AON6484
A drop-in substitute for the AON6484 must be the same N-channel type and offer a drain–source rating of at least 100 V, a continuous drain current rating of at least 12 A and an on-resistance no higher than 0.079 Ω if efficiency and heat matter.
Mechanically, check the replacement against the DFN5X6 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the AON6484?
The AON6484 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 100 V drain-source and 12 A continuous drain current.
What is the maximum voltage of the AON6484?
The AON6484 has a maximum drain-source voltage (Vds) of 100 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the AON6484 handle?
It is rated for 12 A of continuous drain current, with power dissipation limited to 25 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the AON6484?
On-resistance (Rds(on)) is 0.079 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the AON6484 come in?
It is listed in DFN5X6. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the AON6484?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 100 V |
| Gate-Source Voltage (Vgs) | 20 V |
| Drain Current (Id) | 12 A |
| Drain-Source On-Resistance (Rds) | 0.079 |
| Rise Time (tr) | 2.5 nS |
| Output Capacitance (Coss) | 55 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | DFN5X6 |
| Power Dissipation (Pd) | 25 W |
Equivalent & Replacement Parts
No verified equivalents are listed for AON6484 yet.