AON6448 MOSFET — Specifications & Equivalents
Manufacturer: Commonly produced by Alpha & Omega Semiconductor
About the AON6448
The AON6448 is an N-channel MOSFET with a drain–source voltage (VDS) rating of 80 V, a continuous drain current (ID) of 65 A and an on-resistance (RDS(on)) of 0.0096 Ω. It can dissipate up to 83 W and is rated to a junction temperature of 150 °C. It is supplied in the DFN5X6 package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 80 V
- Max continuous drain current (ID): 65 A
- On-resistance (RDS(on)): 0.0096 Ω
- Power dissipation (PD): 83 W
- Max junction temperature (TJ): 150 °C
- Package: DFN5X6
- Manufacturer: Commonly produced by Alpha & Omega Semiconductor
Typical applications
With its 80 V drain–source rating the AON6448 sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.
The 65 A current rating puts it in high-current territory, where conduction loss (I² × RDS(on)) and thermal design usually matter more than switching loss. Budget for adequate copper area and a heatsink.
The low 0.0096 Ω on-resistance keeps conduction loss down, which suits synchronous rectification and continuous high-current paths.
Gate drive and switching notes
Keep gate–source voltage within the ±25 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 10 ns and an output capacitance (Coss) of 340 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the AON6448
A drop-in substitute for the AON6448 must be the same N-channel type and offer a drain–source rating of at least 80 V, a continuous drain current rating of at least 65 A and an on-resistance no higher than 0.0096 Ω if efficiency and heat matter.
Mechanically, check the replacement against the DFN5X6 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the AON6448?
The AON6448 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 80 V drain-source and 65 A continuous drain current.
What is the maximum voltage of the AON6448?
The AON6448 has a maximum drain-source voltage (Vds) of 80 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the AON6448 handle?
It is rated for 65 A of continuous drain current, with power dissipation limited to 83 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the AON6448?
On-resistance (Rds(on)) is 0.0096 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the AON6448 come in?
It is listed in DFN5X6. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the AON6448?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 80 V |
| Gate-Source Voltage (Vgs) | 25 V |
| Drain Current (Id) | 65 A |
| Drain-Source On-Resistance (Rds) | 0.0096 |
| Rise Time (tr) | 10 nS |
| Output Capacitance (Coss) | 340 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | DFN5X6 |
| Power Dissipation (Pd) | 83 W |
Equivalent & Replacement Parts
No verified equivalents are listed for AON6448 yet.