30N20 MOSFET — Specifications & Equivalents
About the 30N20
The 30N20 is an N-channel MOSFET with a drain–source voltage (VDS) rating of 200 V, a continuous drain current (ID) of 40 A and an on-resistance (RDS(on)) of 0.06 Ω. It can dissipate up to 300 W and is rated to a junction temperature of 175 °C. It is supplied in the TO220AB package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 200 V
- Max continuous drain current (ID): 40 A
- On-resistance (RDS(on)): 0.06 Ω
- Power dissipation (PD): 300 W
- Max junction temperature (TJ): 175 °C
- Package: TO220AB
Typical applications
With its 200 V drain–source rating the 30N20 sits in the medium-high-voltage class of switching MOSFETs, typically found in telecom and industrial DC rails, boost and flyback converters, LED and backlight drivers and power-factor-correction stages. Common where the bus sits well above 100 V but below rectified mains.
Gate drive and switching notes
Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 220 ns and an output capacitance (Coss) of 200 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the 30N20
A drop-in substitute for the 30N20 must be the same N-channel type and offer a drain–source rating of at least 200 V, a continuous drain current rating of at least 40 A and an on-resistance no higher than 0.06 Ω if efficiency and heat matter.
Mechanically, check the replacement against the TO220AB footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the 30N20?
The 30N20 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 200 V drain-source and 40 A continuous drain current.
What is the maximum voltage of the 30N20?
The 30N20 has a maximum drain-source voltage (Vds) of 200 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the 30N20 handle?
It is rated for 40 A of continuous drain current, with power dissipation limited to 300 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the 30N20?
On-resistance (Rds(on)) is 0.06 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the 30N20 come in?
It is listed in TO220AB. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the 30N20?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 200 V |
| Gate-Source Voltage (Vgs) | 20 V |
| Drain Current (Id) | 40 A |
| Drain-Source On-Resistance (Rds) | 0.06 |
| Rise Time (tr) | 220 nS |
| Output Capacitance (Coss) | 200 pF |
| Junction Temperature (Tj) | 175 °C |
| Package | TO220AB |
| Power Dissipation (Pd) | 300 W |
Equivalent & Replacement Parts
No verified equivalents are listed for 30N20 yet.