2SK3658 MOSFET — Specifications & Equivalents
Manufacturer: Multi-source (JIS registered part number)
About the 2SK3658
The 2SK3658 is an N-channel MOSFET with a drain–source voltage (VDS) rating of 60 V, a continuous drain current (ID) of 2 A and an on-resistance (RDS(on)) of 0.3 Ω. It can dissipate up to 0.5 W and is rated to a junction temperature of 150 °C. It is available in SOT89, SC62 and PWMINI packages, so confirm the pinout of the exact variant you order.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 60 V
- Max continuous drain current (ID): 2 A
- On-resistance (RDS(on)): 0.3 Ω
- Power dissipation (PD): 0.5 W
- Max junction temperature (TJ): 150 °C
- Package: SOT89, SC62, PWMINI
- Manufacturer: Multi-source (JIS registered part number)
Typical applications
With its 60 V drain–source rating the 2SK3658 sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.
Gate drive and switching notes
Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 140 ns and an output capacitance (Coss) of 65 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the 2SK3658
A drop-in substitute for the 2SK3658 must be the same N-channel type and offer a drain–source rating of at least 60 V, a continuous drain current rating of at least 2 A and an on-resistance no higher than 0.3 Ω if efficiency and heat matter.
Mechanically, check the replacement against the SOT89, SC62 and PWMINI footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Because 2SK3658 is a JIS-registered part number rather than one vendor's proprietary series, it is produced by several manufacturers. Datasheet figures vary slightly between them, so check the datasheet of the brand you actually buy — this also makes like-for-like sourcing easier.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the 2SK3658?
The 2SK3658 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 60 V drain-source and 2 A continuous drain current.
What is the maximum voltage of the 2SK3658?
The 2SK3658 has a maximum drain-source voltage (Vds) of 60 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the 2SK3658 handle?
It is rated for 2 A of continuous drain current, with power dissipation limited to 0.5 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the 2SK3658?
On-resistance (Rds(on)) is 0.3 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the 2SK3658 come in?
It is listed in SOT89, SC62 and PWMINI. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the 2SK3658?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 60 V |
| Gate-Source Voltage (Vgs) | 20 V |
| Drain Current (Id) | 2 A |
| Drain-Source On-Resistance (Rds) | 0.3 |
| Rise Time (tr) | 140 nS |
| Output Capacitance (Coss) | 65 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | SOT89 SC62 PWMINI |
| Power Dissipation (Pd) | 0.5 W |
Equivalent & Replacement Parts
No verified equivalents are listed for 2SK3658 yet.