2P7145B-IM MOSFET — Specifications & Equivalents

About the 2P7145B-IM

The 2P7145B-IM is a MOSFET with a drain–source voltage (V_DS) rating of 200 V and a continuous drain current (I_D) of 26 A. It can dissipate up to 150 W and is rated to a junction temperature of 100 °C. It is supplied in the KT9 package.

At a glance

• Type: MOSFET
• Max drain–source voltage (V_DS): 200 V
• Max continuous drain current (I_D): 26 A
• Power dissipation (P_D): 150 W
• Max junction temperature (T_J): 100 °C
• Package: KT9

Typical applications

With its 200 V drain–source rating the 2P7145B-IM sits in the medium-high-voltage class of switching MOSFETs, typically found in telecom and industrial DC rails, boost and flyback converters, LED and backlight drivers and power-factor-correction stages. Common where the bus sits well above 100 V but below rectified mains.

Gate drive and switching notes

Keep gate–source voltage within the ±20 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.

Choosing a replacement for the 2P7145B-IM

A drop-in substitute for the 2P7145B-IM should match its polarity and offer a drain–source rating of at least 200 V and a continuous drain current rating of at least 26 A.

Mechanically, check the replacement against the KT9 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.

Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.

Frequently asked questions

What is the 2P7145B-IM?

The 2P7145B-IM is a MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 200 V drain-source and 26 A continuous drain current.

What is the maximum voltage of the 2P7145B-IM?

The 2P7145B-IM has a maximum drain-source voltage (Vds) of 200 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.

How much current can the 2P7145B-IM handle?

It is rated for 26 A of continuous drain current, with power dissipation limited to 150 W. Real-world capability depends on your heatsinking and ambient temperature.

What package does the 2P7145B-IM come in?

It is listed in KT9. Verify the pinout of the specific variant, as one outline can carry different pin assignments.

What can I use to replace the 2P7145B-IM?

This page lists 17 candidate equivalents matched on electrical ratings and package. Any replacement should meet or exceed the original voltage, current and dissipation figures and use a compatible drive level.