150N06Y MOSFET — Specifications & Equivalents
About the 150N06Y
The 150N06Y is an N-channel MOSFET with a drain–source voltage (VDS) rating of 60 V, a continuous drain current (ID) of 150 A and an on-resistance (RDS(on)) of 0.006 Ω. It can dissipate up to 156 W and is rated to a junction temperature of 150 °C. It is supplied in the TO247 package.
At a glance
- Type: N-channel MOSFET
- Max drain–source voltage (VDS): 60 V
- Max continuous drain current (ID): 150 A
- On-resistance (RDS(on)): 0.006 Ω
- Power dissipation (PD): 156 W
- Max junction temperature (TJ): 150 °C
- Package: TO247
Typical applications
With its 60 V drain–source rating the 150N06Y sits in the mid-range class of switching MOSFETs, typically found in 24 V and 48 V industrial and battery systems, motor drives and H-bridges and load and hot-swap switching.
The 150 A current rating puts it in high-current territory, where conduction loss (I² × RDS(on)) and thermal design usually matter more than switching loss. Budget for adequate copper area and a heatsink.
The low 0.006 Ω on-resistance keeps conduction loss down, which suits synchronous rectification and continuous high-current paths.
Gate drive and switching notes
Keep gate–source voltage within the ±30 V maximum; exceeding it punctures the gate oxide and destroys the device permanently.
Switching behaviour is characterised by a rise time of 119 ns and an output capacitance (Coss) of 625 pF, which together with the gate drive determines switching loss and the practical upper frequency limit.
Choosing a replacement for the 150N06Y
A drop-in substitute for the 150N06Y must be the same N-channel type and offer a drain–source rating of at least 60 V, a continuous drain current rating of at least 150 A and an on-resistance no higher than 0.006 Ω if efficiency and heat matter.
Mechanically, check the replacement against the TO247 footprint and confirm the pin order — parts sharing a package outline do not always share a pinout.
Where the application switches inductive loads or runs near the voltage limit, keep extra headroom rather than choosing a part that only just meets the original numbers.
Frequently asked questions
What is the 150N06Y?
The 150N06Y is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor). It is rated for 60 V drain-source and 150 A continuous drain current.
What is the maximum voltage of the 150N06Y?
The 150N06Y has a maximum drain-source voltage (Vds) of 60 V. Treat this as an absolute maximum and design with margin, especially when switching inductive loads.
How much current can the 150N06Y handle?
It is rated for 150 A of continuous drain current, with power dissipation limited to 156 W. Real-world capability depends on your heatsinking and ambient temperature.
What is the on-resistance of the 150N06Y?
On-resistance (Rds(on)) is 0.006 Ω. Multiply by the square of your load current to estimate conduction loss.
What package does the 150N06Y come in?
It is listed in TO247. Verify the pinout of the specific variant, as one outline can carry different pin assignments.
What can I use to replace the 150N06Y?
No verified equivalents are listed yet. Choose a part of the same polarity that meets or exceeds every rating above and shares a compatible package and pinout.
Key Specifications
| Type | MOSFET |
|---|---|
| Channel Type | N -Channel |
| Drain-Source Voltage (Vds) | 60 V |
| Gate-Source Voltage (Vgs) | 30 V |
| Drain Current (Id) | 150 A |
| Drain-Source On-Resistance (Rds) | 0.006 |
| Rise Time (tr) | 119 nS |
| Output Capacitance (Coss) | 625 pF |
| Junction Temperature (Tj) | 150 °C |
| Package | TO247 |
| Power Dissipation (Pd) | 156 W |
Equivalent & Replacement Parts
No verified equivalents are listed for 150N06Y yet.